What is involved in a backflow inspection? City Backflow Testing is registered in most cities in the Dallas Fort Worth metroplex to perform annual inspections and backflow testing.

This article should answer that question but if, after reading it, you still have some gray areas in your understanding, call us at (817) 996-2000 or (817) 400-9816 for the answers you need.

What are our backflow inspection steps?

We use USC 10^th Edition Testing Procedures:

• Notify- Notify the customer we are here for testing
• Identify- Make sure serial number is correct and that we have the right assembly
• Inspect- Make sure there are 4 test ports and 2 Shut off handles
• Observe- Attach test equipment and follow proper testing procedures for this assembly
• Test Reports- Enter values for the assemblies
• Turn in all test Reports to the local water Purveyor or City

 

Backflow testing you can count on, no matter where you live . . .

 

We are City Backflow Testing, and we provide professional backflow testing no matter where you live in the Greater Fort Worth area. Specializing in commercial and residential backflow preventer devices.

 

And that’s an important distinction to make, because different cities within the DFW Metroplex have different backflow inspection requirements, so knowing which city requires which specific steps is crucial in an accurate backflow inspection.

 

The USC Manual provides valuable information for cross-connection control programs, the proper use of backflow preventers, and basically everything needed to guarantee protection against backflow dangers.

 

We specialize in commercial backflow systems, testing, inspection, and repair.  Our job is to ensure your backflow system is running properly, and by doing that we allow you to not only pass city inspections but to rest assured there will be no problems in the immediate future.  As mentioned above, we make sure all equipment is working properly, we sign off on the inspection, and we notify city officials that you meet all requirements, as you are expected to meet yearly.

 

We not only provide a yearly inspection, but we also will give you a heads up when your yearly inspection is due so that you don’t forget your annual requirement.

 

And what about residential backflow inspections?

 

Yes, we do residential backflow inspections.  Depending on the city you live in, an annual backflow inspection may or may not be required but seriously, with something as important as backflow inspection, do you really want to take a chance on backflow?  We check your irrigation system for problems. We check your sprinkler system.  We check backflow valves and the pressure vacuum breaker.  When something as important as the potable water supply is at stake, for your family and all the families in your city, this type of preventative maintenance is crucial so that we can all sleep soundly at night.

 

And that is precisely what we at City Backflow Testing provide: peace of mind! We have been doing this for quite a few years.  We have trained for any situation. We have schooled in the latest inspection and repair techniques.  We are the professionals you want to call for annual inspections and any backflow device repair or installation.

 

We are City Backflow Testing and we provide backflow testing in the following cities/areas:  Addison, Aledo, Arlington, Bedford ,Burleson, Carrollton, Cedar Hill, Cleburne, Colleyville, Crowley, DFW Airport, Duncanville Euless, Fort Worth, Frisco, Grand Prairie, Grapevine, Haltom City, Highland Village, Hudson Oaks, Hurst, Irving, Johnson County, Keller, Kennedale, Lake Worth, Lewisville, Mansfield, North Lake, North Richland Hills, Richland Hills, Roanoke, Saginaw, Southlake, The Colony, Trophy Club, Watauga, Weatherford, Westlake, West Worth Village, Willow Park, Town of Westover Hills,